Tuesday, February 14, 2012

Autumn Blaze Callery Pear, Deciduous Tree, woody plant of The Day


Pyrus calleryana 'Autumn Blaze'
    Callery Pear

Type    Tree, woody plant
Hardy range    4B to 8A
Height    35' to 40' / 10.60m to 12.20m
Spread    20' to 30' / 6.00m to 9.20m
Growth rate    Fast
Form    Oval, pyramidal and upright or erect
Exposure    Full sun
Persistence    Deciduous

Bloom Color    White
Bloom Time    Spring

The flowers are very showy.

Environment
This plant tolerates drought, occasional wetness and some salt.
This plant will grow in very dry to occasionally wet soil.
Suitable soil is well-drained/loamy, sandy or clay.
The pH preference is an acidic to alkaline (less than 6.8 to more than 7.7) soil.

Leaf Color    Green
Fall Color    Orange, red and yellow
This plant has attractive fall colors.

Culture Notes
Callery Pear trees are over-used in North America. They can be found in landscapes from coast to coast and north to south in ever increasing numbers. All are are shallow-rooted and will tolerate most soil types including alkaline and clay, they are pollution-resistant and tolerate drought, compacted soil and wet soil.

They have wonderful fall color and nice white flowers in spring. So why all the call for less use of this genus. Truth is these plants are generally well adapted to North America. They help provide attractive landscapes and will be planted for a long time to come. This plant is considered mostly allergy free and causes little or no allergy problems in most people.

Although listed as tolerant of heat in zones 8b and 9a, most trees in these areas in eastern US suffer from lack of vigor, they flower poorly, and attractive fall color does not occur every year.

`Autumn Blaze' is a very adaptable tree suited for downtown and other restricted soil spaces.  The more dominant trunk and open form of `Autumn Blaze' Callery Pear helps to make it less susceptible to wind-damage than `Bradford'.  Branch angles are wider and lateral branches grow at a slower rate than on `Bradford', therefore the branches are better attached to the trunk. This cultivar is highly susceptible to fire blight in some tests and grows slower than many other cultivars along streets. Plants in containers tolerate moderate soil salt solutions up to about 4 mmhos/cm according to the saturated media extract method.

Maintain adequate mulch area

Clear all turf away from beneath the branches and mulch to the drip line, especially on young trees, to reduce competition with turf and weeds. This will allow roots to become well established and keep plants healthier. Prune the tree so trunks and branches will not rub each other.  Remove some secondary branches on main branches with included bark.  This reduces the likelihood of the main branch splitting from the tree later when it has grown to become an important part of the landscape.  Locate the tree properly, taking into account the ultimate size, since the tree looks best if it is not pruned to control size. The tree can enhance any landscape with its delightful spring flush of foliage. It can be the centerpiece of your landscape if properly located.

Tree establishment specifications

Choose good quality trees for planting. The most common cause of young tree failure is planting too deep.  In most instances, the point where the top-most root in the root ball originates from the trunk (referred to as the root flare zone or root collar) should be located just above the soil surface.  You may have to dig into the root ball to find the root flare. If there is nursery soil over this area, scrape it off. Never place ANY soil over the root ball. The planting hole should be at least twice the width of the root ball, preferably wider because roots grow best in loose soil.  In all but exceptional circumstances where the soil is very poor, extensive research clearly shows that there is no need to incorporate any amendments into the backfill soil. Simply use the loosened soil that came out of the planting hole. Simply planting with the topmost portion of the root ball slightly higher than the surrounding soil might still install the tree too deep - be sure to locate the root flare.

Weed suppression during establishment is essential.  Apply a 3-inch thick layer of mulch to at least a six-foot diameter circle around the tree. This area should be at least two feet in diameter for each inch of tree trunk diameter and maintained during the establishment period.  Apply a thinner layer of mulch directly over the root ball but keep it at least 10 inches from the trunk. This allows rainwater, irrigation and air to easily enter the root ball and keeps the trunk dry.  Placing mulch against the trunk and applying too thick a layer above the root ball can kill the plant by oxygen starvation, death of bark, stem and root diseases, prevention of hardening off for winter, vole and other rodent damage to the trunk, keeping soil too wet, or repelling water.

Regular irrigation after planting encourages rapid root growth that is essential for tree establishment.  Trees provided with regular irrigation through the first growing season after transplanting require about 3 months (hardiness zones 9-11), 6 months (hardiness zones 7-8), or one year or more (hardiness zones 2-6) per inch of trunk diameter to fully establish roots in the landscape soil. Trees in desert climates may take longer to establish.  Trees that are under-irrigated during this establishment period (and most trees are) often require additional time to establish because roots grow more slowly.   Be prepared to irrigate through the entire establishment period, especially during periods of drought.

Irrigation also helps maintain and encourage the desirable dominant leader in the tree canopy on large-maturing trees.  Instead of a dominant leader, trees that are under-irrigated during the establishment period often develop undesirable, low, co-dominant stems and double leaders that can split from the tree later.

Unlike established plants, which do best with deep, infrequent irrigation, research clearly shows that recently transplanted trees and shrubs establish quickest with light, frequent irrigation.  For trees planted in spring or summer, provide one (cooler hardiness zones) to three irrigations (warmer hardiness zones) each week during the first few months after planting.  Daily irrigation in the warmest hardiness zones provides the quickest establishment.  Following the initial few months of frequent irrigation, provide weekly irrigation until plants are fully established.  With every irrigation, apply one (cool climates) to two (warm climates) gallons of water per inch trunk diameter (e.g. 2 to 4 gallons for a 2-inch tree) over the root ball only.  In most landscapes that receive more than 30 inches of rain or irrigation annually, if the mulch area is maintained weed-free, irrigation does not need to be applied outside of the root ball.  Never add water if the root ball is saturated.

In cooler hardiness zones, in all but the driest years, irrigation of spring- and summer-planted trees usually can be discontinued once fall color has begun. Irrigation of fall planted trees, however, should be continued until foliage has dropped from the deciduous trees in the region.  In warmer climates, irrigate fall-and winter-planted trees as described for the spring- and summer-planted trees.

In drier, desert climates there is benefit to be gained from applying additional irrigation outside of the root ball area. This is best done by making a large diameter berm four to six inches high, then filling it with water so it percolates into the soil.  For the first two years, irrigate twice each week through the spring, once per week in summer provided monsoons arrive, and twice each week again in fall if it remains warm.  Taper off watering to once or twice each month in winter and resume twice weekly next spring.  For years three to five, water twice per month in spring, summer, and fall and once or twice per month in winter.  During years five through seven, water once every three weeks in warm weather and once every six weeks in winter.  After this, the drought-tolerant desert trees should be able to survive on natural rainfall.

Trees with good, strong structure need no pruning at planting, except to remove broken twigs.  Do not remove branches to compensate for root loss - research has shown that this can be detrimental to establishment.




 Please feel free to comment on any post at any time. All feedback is welcome and we’d love to receive all of your thoughts.

Wednesday, February 8, 2012

Coral Honeysuckle,Semi-evergreen Shrub, vine, woody plant of The Day



Lonicera x heckrottii
Coral Honeysuckle, Goldflame Honeysuckle

Type Shrub, vine, woody plant
Hardy range 5B to 9A
Height 10' to 50' / 3.00m to 15.20m
Spread 10' to 50' / 3.00m to 15.20m
Growth rate Fast
Form Spreading or horizontal, variable height and variable spread
Exposure Partial shade or partial sun to full sun
Persistence Semi-evergreen

Bloom Color Pink, red and yellow
Bloom Time Spring and Summer

The flowers are fragrant and showy.

Environment
This plant tolerates some drought and some salt.
This plant will grow in dry soil.
Suitable soil is well-drained/loamy, sandy or clay.
The pH preference is an acidic to alkaline (less than 6.8 to more than 7.7) soil.

Leaf Color Green
Fall Color No change in fall color

Culture Notes
Honeysuckle tolerates most soils except dry sands. As with many vines, some training may be needed to direct growth. Vines will accumulate foliage on top of a fence or other structure but yearly heading back can encourage growth close to the ground. It is best suited for sunny locations and flowers poorly in the shade. Although a vigorous twining vine, this Honeysuckle does not spread out of control quite as easily as Japanese Honeysuckle.

Please feel free to comment on any post at any time all feedback is welcome and we’d love to hear it.

Blue Mist Colorado Spruce, Evergreen Shrub, groundcover, woody plant of The Day

 Picea pungens 'Prostrate Blue Mist'
    Colorado Spruce,  Blue Spruce

Type    Shrub, groundcover, woody plant
Hardy range    3A to 7A
Height    24" to 4' / 60cm to 1.20m
Spread    4' to 6' / 1.20m to 1.80m
Growth rate    Slow
Form    Rounded and spreading or horizontal
Exposure    Partial shade or partial sun to full sun
Persistence    Evergreen

Bloom Color    Green, orange and purple
Bloom Time    Spring

Environment
This plant tolerates some drought, occasional wetness and some salt.
This plant will grow in dry to occasionally wet soil.
Suitable soil is well-drained/loamy, sandy or clay.
The pH preference is an acidic to alkaline (less than 6.8 to more than 7.7) soil.


Leaf Color    Blue
Fall Color    No change in fall color
This plant has attractive foliage.

Culture Notes
This is a beautiful tree when it can be ground properly without disease. Unfortunately, it is very susceptible to a stem canker that disfigures the tree. If you select this tree in the eastern US, plant only a few to prevent disappointment should disease strike. The tree grows best in rich, moist soil, and will benefit from mulch placed out to the edge of the canopy. Irrigation in dry weather also helps.  Best growth occurs in full sun. Trees tolerate clay soil and occasionally wet soil very well. Colorado Spruce casts dense shade when branched to the ground, so no grass grows beneath it.

Planting and establishing shrubs

The most common cause of young plant failure is planting too deep.  Plant the root ball no deeper than it was in the nursery.  In most instances, the root flare zone (point where the top-most root in the root ball originates from the trunk) should be located just above the landscape soil surface. Sometimes plants come from the nursery with soil over the root flare. If there is soil over this area, scrape it off.  The planting hole should be at least twice the width of the root ball, preferably wider.  In all but exceptional circumstances where the soil is very poor, there is no need to incorporate anything into the backfill soil except the loosened soil that came out of the planting hole.  Never place ANY soil over the root ball. If a row or grouping of plants is to be installed, excavating or loosening the soil in the entire bed and incorporating organic matter enhances root growth and establishment rate.

Weed suppression during establishment is essential.  Apply a 3-inch thick layer of mulch around the plant to help control weed growth.  Keep it at least 10 inches from the trunk.  If you apply it over the root ball, apply only a one or two inch layer.   This allows rainwater and air to easily enter the root ball and keeps the trunk dry.  Placing mulch against the trunk or applying too thick a layer above the root ball can kill the plant by oxygen starvation, death of bark, stem and root diseases, prevention of hardening off for winter, vole and other rodent damage to the trunk, keeping soil too wet, or repelling water.  Regular irrigation through the first growing season after planting encourages rapid root growth, which is essential for quick plant establishment.



 

OUTDOOR LIVING By Steve Chepurny, RLA, ASLA

OUTDOOR LIVING: Plant a Look and Feeling of Space and Make it Functional

            Lifestyles continue to change with trends, generational needs, technological advances and the desire for a better quality of life.  In recent decades, landscape architects and designers have encountered a revolutionary vision and change fueled by the public’s desire to marry interior spaces to freer flowing exteriors. Outdoor living is the fastest growing segment of the industry, and its prime elements include architectural elements, fire and water features, cook stations, furniture, lighting and entertainment systems. 
          But creating a true sense of outdoor space that interacts with the home’s interior, its homeowners and still functions independently within its own perceived boundaries is the key guiding principle. Boundaries at times can be deceiving. Certainly, walls, fences or a house line all can dictate a boundary, but more often than not a tree line, row of hedges or flower bed also fashion as boundaries or sight lines that guide and shape an outdoor space. The best ones reflect only a subtle change from area to area within the entire garden, so that the users experience an intimate gathering area within a larger whole for a cohesive feeling.  
         How do designers delineate an area? It can be as simplistic as changing a paving pattern on a terrace or patio or introducing a carefully sited seat wall.  Overhead structures or pergolas can also offer a boundary mark. The space which is defined by these architectural additions often becomes the central point of activity. Water elements—whether a small pool, fountain or bubbler--introduce a different design consideration. Water can denote a playful environment, place for passive contemplation, reflection and motion within the same area, and is best determined from the onset. The beauty of water is its ability to act in so many different capacities while creating so many different emotions. Kids want to play in it if large enough, adults want to relax by it or just look and listen to it, and at times everyone just wants to take in the beauty of its motion. 
Fire elements add as much interest—and drama, too--to a space as water does. Fire creates a central gathering point or can simply be used to lend an ambience to a space through passive lighting. Fireplaces, fire pits, fire torches, fire bowls are all excellent ways to create a exhilarating but relaxing mood, a feeling of heat and warmth and a place often to do some cooking, even if it’s just s’mores. 
Outdoor cook stations have certainly surpassed the charcoal grill or Hibachi of past generations!  Depending on the needs of the homeowners, an area can be designed simply for a grill station with an adjacent counter or for a much fuller blown, self-contained kitchen and entertainment zone. Clients have their own needs and budgets to bear in mind, often also determined by the space allotted. In addition to a multi-functional grill, other options include refrigeration, freezer, sink, storage, warming drawers, pizza ovens, side burners, trash receptacles, beer or beverage dispenser, ice maker. The design of these elements into a space is certainly important but how the space interacts with the people is the most important consideration.  Similar to the inside kitchen, the outdoor one needs to be in a centralized area and close to the back door to make bringing out food and beverages easier. But the area also needs to relate well to other parts of the garden—where people will eat and sit and how they’ll move about so there’s enough circulation area. Subtle—or not so subtle—design changes with different textures, plantings, hardscapes, furniture and lighting can help direct people.
Because of the desire to spend more time outdoors, designers also need to make the outdoor living area a place that’s fun, comfortable and defines its owners’ interests, as well as their house. This can be done with multiple elements from furnishings such as seating, tables and rugs to lighting and entertainment systems of a flat-screen TV and sound system designed specifically for the outdoors. Lighting can be utilized to direct people, intensify a focal point, create silhouettes or simply add a soft, elegant ambience to a quiet evening dinner.  I highly recommend that the lighting be low voltage and designed with dimmers.  One can control the mood based on the event.   Site furnishings and amenities are important but it is best if  furniture play a secondary role in defining spaces, so homeowners can take advantage most of the views and vistas already there or create a new one through a focal point of perhaps that strategically placed fire or water element. 
The smell/ scent of a space is very intriguing to watch.  A carefully placed Lilac or Sweetbay Magnolia can enliven the senses.  The introduction of a natural wood burning firepit or fireplace always brings back great memories while creating the air of relaxation.  The introduction of scents are enjoyable from the very young to the old.  One watches the discoveries of a young child to the reminiscent thoughts of adults and seniors.  It can capture all audiences. 
In the end, a well conceived design and space that take into account all the possibilities will offer years of enjoyment for everyone and marry better the house to its site. 

By Steve Chepurny, RLA, ASLA
President, Director of Sales
BEECHWOOD LANDSCAPE ARCHITECTURE
& CONSTRUCTION, LLC
Southampton, NJ 08088

Monday, February 6, 2012

Chinese Juniper, Evergreen Tree of The Day

Juniperus chinensis 'Sylvestris'
    Chinese Juniper,  Juniper

Type    Tree, woody plant
Hardy range    4A to 10A
Height    15' to 25' / 4.60m to 7.60m
Spread    6' to 10' / 1.80m to 3.00m
Growth rate    Average
Form    Oval and pyramidal
Exposure    Partial shade or partial sun to full sun
Persistence    Evergreen

Bloom Color    Brown and yellow
Bloom Time    Spring

Environment
This plant tolerates drought and salt well.
This plant will grow in very dry soil.
Suitable soil is well-drained/loamy, sandy or clay.
The pH preference is an acidic to alkaline (less than 6.8 to more than 7.7) soil.

Leaf Color    Green
Fall Color    No change in fall color
This plant has fragrant foliage.

Culture Notes
Sylvester Juniper grows 20- to 30-feet-tall in a wide, columnar habit.  Foliage is a beautiful, soft-looking medium-green, but is sharp to the touch.  It is a refined cultivar of Chinese Juniper suited for planting in most any landscape.  It should be planted more often.

This juniper is best used as a tall screen on a large-scale site in the full sun.  It can be planted along the border of a commercial or residential landscape to define the space or set the boundaries of the property.  Its dense grown in the sun makes it nicely suited for a screen.  It should be spaced about 6 feet for a quick screen.

Natural habitat is dry and windy with full sun exposure.  It looks best in an open site with no shade during the day.  This allows the foliage to dry quickly in the morning and helps prevent foliage disease from thinning the canopy.  A well-drained soil is essential for good growth.  Wet soil rots the roots and causes plant decline.  Junipers can be challenging to transplant in the landscape due to poor slow regeneration on cut roots. Plants tolerate high soil salt - up to 8 mmhos/cm.

Planting and establishing shrubs

The most common cause of young plant failure is planting too deep.  Plant the root ball no deeper than it was in the nursery.  In most instances, the root flare zone (point where the top-most root in the root ball originates from the trunk) should be located just above the landscape soil surface. Sometimes plants come from the nursery with soil over the root flare. If there is soil over this area, scrape it off.  The planting hole should be at least twice the width of the root ball, preferably wider.  In all but exceptional circumstances where the soil is very poor, there is no need to incorporate anything into the backfill soil except the loosened soil that came out of the planting hole.  Never place ANY soil over the root ball. If a row or grouping of plants is to be installed, excavating or loosening the soil in the entire bed and incorporating organic matter enhances root growth and establishment rate.

Weed suppression during establishment is essential.  Apply a 3-inch thick layer of mulch around the plant to help control weed growth.  Keep it at least 10 inches from the trunk.  If you apply it over the root ball, apply only a one or two inch layer.   This allows rainwater and air to easily enter the root ball and keeps the trunk dry.  Placing mulch against the trunk or applying too thick a layer above the root ball can kill the plant by oxygen starvation, death of bark, stem and root diseases, prevention of hardening off for winter, vole and other rodent damage to the trunk, keeping soil too wet, or repelling water.  Regular irrigation through the first growing season after planting encourages rapid root growth, which is essential for quick plant establishment.